Enameled Wire Tan Delta System,Conductor Resistance Meter,Digital Conductivity Meter,Dielectric Constant Meter,Million Megohm Meters (Insulation Testers),R C Unbalalnce Meter

Home

About Us

We Manufacture

Enquiry

Wires & Cables Test Equipments

We are leading manufacturers of wires & cable testing Equipments which includes Meg Ohm Meters,Conductor Resistance Meters,Conductivity Meters,Enamelled wire Tan Delta System,Breakdown Voltage Testers,Cable Capacitance Meters,Impedance Meters,Cross Talk & Attenuation Meters,RC Unbalance Meters.

Enameled Wire Tan Delta System

We are only asian manufacturer of enameled wire tan delta systems.Ew188 is specially designned for checking the curing quality of enameled wire.
Features:
Auto Balancing.
Digital Readout of Temperature & Tan Delta.
Useful for Bending Point Test.
Useful for Single Point Test.
User Friendly Windows Based Software.
Coloured graph comparison.
Software based PID Controller.
USB Communication port.

Ask for Quote

Conductor Resistance Meter

Our conductor resistance meter is perfect for measurement of conductor resistance of one meter PVC insulated Cu conductor. Our Conductor Resistance Meter model CRM-1for communication cables & copper wires. Following are the features of this instrument:

Direct Digital display of conductor resistance in raw value/normalized (Ohms/Km at 20° C)
Facility to enter temperature through thumb wheel switch.
Automatic input of temperature through in built temperature sensor.
Four terminal method of measuring for increased accuracy in measurements.
Self Stripping knife edge contacts for easy insertion of sample (less preparation time)

Ask for Quote

Digital Conductivity Meter

Portable Conductivity Meter has been developed to facilitate easy determination of conductivity of nonferrous metals based on eddy current principle. Instrument uses a probe which when placed on the surface of metal indicates conductivity on a linear scale panel meter. The instrument can be used to measure stressed conditions if they can be related to the electrical conductivity of the specimen. Whilst the accuracy claimed is 2%however, for high conductivity samples an accuracy of better than 1%is easily obtained. The users can also, if desired, use their own sample of known conductivity in the region of interest to enhance the accuracy. The instrument is supplied in a rugged carrying case which gives complete protection and has separate pocket for probe. The equipment can be used without removing it fromthe carrying case.

Ask for Quote

Dielectric Constant Meter

The dielectric Constant Meter is specially designed for measurement of relative dielectric constant permittivity of semi-solid or liquid insulating materials at 1 MHz test Frequency as per ASTM D 924. This instrument is used with SIVA Three Terminal Oil Cell. It can also be used with any other test jig. The reading of dielectric constant is direct and no calculations involved.

Salient Features

Suitable for measurement of dielectric constant of liquid and semi-solid insulating materials. It can also be suitable or solid insulating materials if used with proper jig.
Particularly very useful for testing of petroleum jelly, wax etc.
Test signal is pure sinusoidal waveform of 1 MHz frequency.
Direct Reading of dielectric constant. No calculations involved.
Digital Readout.
Built in calibration facility.
Operates directly on 230 VAC mains supply.
Attractive housing.

Ask for Quote

Million Megohm Meters (Insulation Testers)

This series of Million Megohm Meters are designed to test electronic components such as paper Capacitors, Plastic Capacitors, Ceramic Capacitors, Insulators, Semi Conductors, Switches, Connectors, Transformers, Motors etc. as per I. S. I. recommendations. The instruments have facility for checking insulation resistance in the range of 1 megohm to 10 million megohm after one minute of charging. Ultra stabilised power supply (.001% short term drift) permits measurements of intrinsic value of insulation resistance if required, even with capacitive loads. Separate push button controls and visual indicators for "Charge", and "Discharge" function are ideally suited for rapid and safe testing of components in a factory. Maximum output current has been limited to safe value to eliminate the risk of serious shock to operators. The instruments are available in five models as per specifications given overleaf.

Push Button Controls for rapid testing.
Tests as per I. S. I. recommendations.
Wide measurements range
Fully protected against all overload and short circuits.
Completely solid state circuitry, hence drift free operation.
Guard Terminal provided.
Suitable for testing 'EARTHED' Samples.
Suitable for testing insulation liquids (Resistivity Measurements) with oil cell as per IS : 335.