Sivananda Electronics

Mentioned price is for the basic model. Product is customisable, price will vary.

TANDELTA SYSTEM EW-188 is specially designed for quality control of enameled wire. Tangent delta and the tangent data temperature Characteristic are the concepts often discussed in connection with enameled copper wire. The precise measurement of tangent delta is of higher importance for the characterization of hardening state of the enameled insulation. If an alternating voltage is applied to wire enamel, a small current passes through it which is phase shifted. A yard stick for this phase shift is tangent delta. In EW-188 a measuring frequency of 1 KHz sine voltage is applied to the sample. The result is phase shift between voltage and current which is proportional to tangent delta. This phase shift is detected with very precise phase detector circuit. EW-188 can be used for single point measurement as well as determinations of bending point. The temperature can be set anywhere upto 300 degree Celsius for single point measurement. Tan delta and temperature are displayed simultaneously. Further more the curve measurement can be automated on a Laptop PC through suitable windows based software.

Features:

• Digital Readout For Temperature & Tan Delta.
• Software Based Pid Temperature Control.
• Windows Based User Friendly Software.
• Usb Communication Port For Laptop Connection.
• Multiple Graph Comparison On Screen.
• Suitable For Single Point As Well As Bending Point Measurement.
• Fast Curve Plotting.
• Auto Balancing

Mentioned price is for the basic model. Product is customisable, price will vary.

Conductor Resistance Meter model CRM-1 for communication cables & copper wires.

Features:

• Suitable for measurement of conductor resistance of one meter PVC insulated Cu conductor.
• Direct Digital display of conductor resistance in raw value/ normalised (Ohms/Km at 20° C)
• Facility to enter temperature through thumb wheel switch.
• Automatic input of temperature through in built temperature sensor.
• Four terminal method of measuring for increased accuracy in measurements.
• Self Stripping knife edge contacts for easy insertion of sample (less preparation time).

Mentioned price is for the basic model, for 5KV with 10mA & 30mA setting. Product is customisable, price will vary.

Designed for testing the electrical insulation ability and electric strength.

Models available for different voltage requirements. 3KV to  15KV.

We are the supplier of Breakdown Tester.

Specifications:

• Input Voltage : 230VAC, 50Hz, Single Phase.
• Output Voltage : 0 to 5KVAC / DC.
• Trip current Selectable : 10mA / 30mA .
• Display : 3 ½ Digit LED Display.
• Resolution : 0.01KV
• Accuracy : ± 1% of reading ± 1 digit.
• Indications : HV ON , HV OFF.
• Variac : Manual
• Protections : Zero start Protection,
• ( Customized specification)